Guangzhou Yun Electronic Technology Co., Ltd. sound
Tel: 18122256892
Fax: 18122256892
Mobile: 18122256892 Manager Chen
E-mail: [email protected]
Address: Panyu District, Guangzhou City Agricultural Science Institute South Street on the 8th floor, No. 1, third floor, two
Adaptive filters convert between Fast mode and Exact mode. Fast mode is suitable for applications where the microphone position often changes, for example in conferencing systems with multiple microphones switched. Precise mode is suitable for applications where the microphone position is fixed, for example, a stable acoustic environment.
Adaptive filters can converge at a slower rate, effectively suppressing more of the reflected components. Up to 12dB of gain can be additionally gained before acoustic feedback occurs, depending on the acoustic environment and the chosen operating mode.
The feedback suppressor also has a built-in automatic mixer for both mic inputs. In many cases, such as using two microphones at the podium, pulpit, or conference table, you can better capture the sound of the moving speaker, often adding to the risk of acoustic feedback. In view of this problem, the automatic mixer in the feedback suppressor will automatically reduce the gain of the microphone with the weaker signal input while increasing the gain of the other microphone with stronger signal input. In this way, it tracks the moving speaker and produces the best sound clarity.
At the same time, the maximum gain remaining without acoustic feedback is maintained, since the total amount of gain remains constant. The automixer function still works even if the feedback suppressor is disabled.
Technical parameters >>>
AC power
Voltage 230/115 VAC, ± 10%, 50/60 Hz
◆ Inrush current 1.5 A, 230 VAC / 3 A, 115 VAC
◆ maximum power consumption of 50 VA
performance
◆ sampling rate (fs) 32 kHz
◆ Frequency response 125 Hz - 15 kHz
◆ Distortion <0.1% (at 1 kHz)
◆ Gain (Bypass Mode) 0 dB line input, 24/36/48 dB microphone input
◆ Gain (active mode) 0 dB line input, 24/36/48 dB microphone input
◆ Signal to noise ratio> 90 dB
Signal delay <11 ms
◆ Dissipator frequency shift, up to 5 Hz
◆ shielding noise
◆ microphone / line input 1
◆ Connector 3-pin XLR, 5-pin DIN, balanced
◆ Maximum level of 18/6 / -6 dBV line input, -18 / -30 / -42 dBV microphone input
◆ Impedance 10 kilohms / 2 kilohms (line / microphone) CMRR> 25 dB (50 Hz to 20 kHz)
◆ Phantom power 16 V (microphone only, switchable)
◆ Priority control loop, DIN pins 4 and 5
◆ Microphone input 1 x
◆ Connector 3-pin XLR, 5-pin DIN, balanced
◆ Maximum level -18 / -30 / -42 dBV
◆ Impedance 2 kilohms
◆ Phantom power 16 V (switchable)
◆ Priority control loop, DIN pins 4 and 5
To build China's high-end brands!
